Genuine ADRO body kit for TESLA MODEL 3 · 10 parts
TESLA MODEL 3
Genuine ADRO carbon fiber body kit By Flinstone Autoparts
Genuine ADRO parts for the TESLA MODEL 3 — carbon fiber and aerodynamic components developed by ADRO using 3D vehicle scanning and CFD simulation, for an aggressive look and a precise fit to the factory mounting points.
There are 10 parts for this model (Front, Side, Rear, Wing / Spoiler, Accessories). Fit individual parts or build a full kit — see photos and details of each part in the parts section below.
Ask Flinstone Autoparts about product details, materials and installation before ordering — our team will check your model and year against the supported parts.
10 parts · Tap a card to see all photos and details
The long-awaited V2 carbon fiber front lip for the Tesla Model 3 is finally here. Featuring a sharp and contoured new design with winglets towards the outside, the V2 carbon fiber splitter was designed to get rid of the smooth, rounded front end of the Model 3 and completely transform it into an aggressive electric monster. The real carbon fiber construction ensures the lightest and strongest properties possible, while aiding in aerodynamics to help improve range.
The ADRO front lip for the Tesla Model 3 is made from 100% handcrafted carbon fiber that gets rid of the rounded, bland styling of the factory front bumper and converts it into a much more aggressive and track-focused design that really turns heads. Featuring a glossy carbon fiber finish, angular design and lightweight construction, this is the highest quality front lip kit currently available for the Tesla Model 3. It's designed to accent and bring out the rounded edges of the Model 3 while adding the angrier and sportier look that so many Model 3 owners are looking for. The Tesla Model 3 may not have any engine noise, so let the carbon fiber front lip kit make all the noise instead.
This premium body kit is manufactured from 100% genuine prepreg carbon fiber and is ultra-lightweight with maximum durability and quality. Commonly used in high-end race cars and supercars, prepreg (aka dry) carbon fiber is now available for drivers looking for the very best.
Using computational fluid dynamics (CFD), the ADRO team of aerodynamicists tested the efficiency gains of a Tesla Model 3 fitted with ADRO’s aero package compared to a factory car. ADRO’s CFD analyses showed a 3.25% reduction in total vehicle drag and a downforce increase of 846 N, resulting from the installation of all four ADRO parts - front lip, side skirt, rear diffuser, and spoiler. This means that ADRO’s Premium Prepreg Carbon Fiber Full Body Kit made the Model 3 even more aerodynamically efficient, which will ultimately translate into a positive effect on overall range and performance.
Add some carbon fiber flare to the side of your Tesla Model 3 with the ADRO V2 carbon fiber side skirt kit. ADRO's side skirt is designed to redirect airflow to improve aerodynamics and slightly improve the electric range of the Model 3. Made from real hand-crafted carbon fiber and engineered to fit better than an OEM part, the V2 carbon fiber side skirts will ensure your Model 3 stands out from the rest.
Complete the side profile of your Tesla Model 3 with the ADRO full carbon fiber side skirt kit. This kit comes with everything you need for a quick and easy installation that is guaranteed to give your Tesla Model 3 a whole new look. This side skirt is engineered to increase aerodynamic efficiency by decreasing drag so that you get better performance and efficiency out of your Tesla Model 3. Since this is made from one hundred percent real handcrafted carbon fiber, you won't find lighter or stronger side skirts on the market. You can combine this carbon fiber side skirt kit with the ADRO carbon fiber front lip and carbon fiber rear diffuser to get the maximum amount of performance, range, and aesthetic out of your Tesla Model 3. These are the highest quality aftermarket parts currently available for the Tesla Model 3 and when they're all fitted together, they will make a world of difference that will make you fall in love with your Model 3 all over again.
This premium body kit is manufactured from 100% genuine prepreg carbon fiber and is ultra-lightweight with maximum durability and quality. Commonly used in high-end race cars and supercars, prepreg (aka dry) carbon fiber is now available for drivers looking for the very best.
Using computational fluid dynamics (CFD), the ADRO team of aerodynamicists tested the efficiency gains of a Tesla Model 3 fitted with ADRO’s aero package compared to a factory car. ADRO’s CFD analyses showed a 3.25% reduction in total vehicle drag and a downforce increase of 846 N, resulting from the installation of all four ADRO parts - front lip, side skirt, rear diffuser, and spoiler. This means that ADRO’s Premium Prepreg Carbon Fiber Full Body Kit made the Model 3 even more aerodynamically efficient, which will ultimately translate into a positive effect on overall range and performance.
Take the rear design of the Model 3 to a whole new level with the ADRO V2 carbon fiber rear diffuser for the Tesla Model 3. This diffuser features winglets and additional air channeling to redirect airflow, improving the Model 3's ability to cut through the air. This can slightly improve range and, thanks to the real carbon fiber construction, will turn heads everywhere your Model 3 goes.
Take the rear end of your Tesla Model 3 to a whole new level. ADRO developed a 100% real carbon fiber rear diffuser for the Tesla Model 3 that completely transforms the look of the rear of this car. This is made from only the highest quality handcrafted carbon fiber and has been carefully engineered to fit the Model 3 perfectly while improving aerodynamic performance. This rear diffuser decreases drag, which increases aerodynamic efficiency, and could potentially even increase the electric range of your Tesla Model 3. Since this car doesn't use a traditional combustion engine, making your Model 3 more aerodynamic will only help its range. So not only will you be getting the additional performance and efficiency benefits, but you'll get the best-looking diffuser that is being made for the Tesla Model 3 with strength and quality that you can trust and fitment that can be compared to a factory-installed part.
This premium body kit is manufactured from 100% genuine prepreg carbon fiber and is ultra-lightweight with maximum durability and quality. Commonly used in high-end race cars and supercars, prepreg (aka dry) carbon fiber is now available for drivers looking for the very best.
Using computational fluid dynamics (CFD), the ADRO team of aerodynamicists tested the efficiency gains of a Tesla Model 3 fitted with ADRO’s aero package compared to a factory car. ADRO’s CFD analyses showed a 3.25% reduction in total vehicle drag and a downforce increase of 846 N, resulting from the installation of all four ADRO parts - front lip, side skirt, rear diffuser, and spoiler. This means that ADRO’s Premium Prepreg Carbon Fiber Full Body Kit made the Model 3 even more aerodynamically efficient, which will ultimately translate into a positive effect on overall range and performance.
Increase downforce while completely transforming the rear end of the Model 3 with the ADRO prepreg AT-S wing. This hand-crafted dry prepreg carbon fiber wing finds the perfect balance between function and form while staying as lightweight as possible.
Feel like the back of your Model 3 just isn't aggressive enough? The ADRO carbon fiber rear spoiler is exactly what your Model 3 is missing. Featuring a beautiful carbon fiber finish, sharp lines, and a perfect fit and finish, this spoiler is able to tie the styling of the Model 3 together all on its own. If you happen to have any other ADRO carbon fiber components on your Model 3, this spoiler was designed to pair perfectly with those parts as well, making it one of the easiest ways to change the entire look of your Tesla Model 3.
Made from 100% real handcrafted carbon fiber, the ADRO Tesla Model 3 rear spoiler has a smooth and elegant design that matches the back of the Model 3 perfectly. It's a perfect balance between aggression and subtlety. ADRO definitely recommends that you pair this rear wing with the ADRO carbon fiber rear diffuser, carbon fiber side skirts, and carbon fiber front lip to give a cohesive performance look to your entire Model 3. But, if you're just looking for a rear spoiler for your Tesla Model 3, you won't find a higher-quality, stronger, or lighter rear spoiler option than this.
This premium body kit is manufactured from 100% genuine prepreg carbon fiber and is ultra-lightweight with maximum durability and quality. Commonly used in high-end race cars and supercars, prepreg (aka dry) carbon fiber is now available for drivers looking for the very best.
Using computational fluid dynamics (CFD), the ADRO team of aerodynamicists tested the efficiency gains of a Tesla Model 3 fitted with ADRO’s aero package compared to a factory car. ADRO’s CFD analyses showed a 3.25% reduction in total vehicle drag and a downforce increase of 846 N, resulting from the installation of all four ADRO parts - front lip, side skirt, rear diffuser, and spoiler. This means that ADRO’s Premium Prepreg Carbon Fiber Full Body Kit made the Model 3 even more aerodynamically efficient, which will ultimately translate into a positive effect on overall range and performance.
ADRO's long-awaited side camera covers for the Model 3 are here. Made from real carbon fiber with a gloss finish, ADRO's camera covers give your Tesla Model 3 an outstanding look. Experience the durability and reliability of carbon fiber. ADRO's camera covers are designed for long-lasting appeal and won't be affected by the elements, giving you peace of mind.
V1 Compatible with ALL 2017 - 2020 Model 3 with chrome cameras.
There are 10 ADRO parts for the TESLA MODEL 3 (Front 2, Side 2, Rear 2, Wing / Spoiler 3, Accessories 1). You can fit individual parts or build a full kit. Send your model and year via LINE @Flinstoneautoparts and we will confirm which parts fit before you order.
Installation time depends on the parts and the car. We install at both branches — Sathorn (Soi Yen Chit 7) and Liap Thang Duan Ekkamai–Ram Inthra (Lat Phrao) — Monday to Saturday, 09:00–18:00. Book in advance via LINE @Flinstoneautoparts so the parts and technicians are ready on time.
Pricing depends on the car, the parts you choose, the material and the installation, so prices are not listed on this page. Ask for a quote via LINE @Flinstoneautoparts or call 081-103-4034 — including your model and year helps us reply faster.
Parts list, descriptions and product images from ADRO Global (global.adro.com) · Options and materials vary by model · Ask the Flinstone Autoparts team for details
