ADRO Body Kit for BMW F80 M3

Get an edge at the racetrack or just add some more style to your BMW. The ADRO carbon fiber canards will be an easy to install modification for any M car. For the most part, canards are universal, but ADRO specifically designed these to fit the styling of both the BMW F80 M3 and F82 M4. These canards are subtle, made from the highest-quality handcrafted carbon fiber, and are proven to increase downforce for better cornering performance. This is one of the easiest ways to get both a cosmetic and a performance benefit in one product that doesn't require a ton of installation time. Get ready to dominate the street and the track with these carbon fiber front bumper canards for the BMW M3 and M4.

Made from hand-crafted carbon fiber, these BMW M3 and M4 air ducts will retain the factory fitment of the OEM air ducts while being lighter, stronger, and more aggressive than the factory air ducts.

The ADRO carbon fiber front lip adds aggressive, race-inspired styling and additional downforce to your car. It's made completely of real, hand-crafted carbon fiber that's designed to withstand a beating at the racetrack or the wear and tear of everyday driving. This BMW M3 and M4 aftermarket front lip is designed to fit just like an OEM part but will give you the aggressive look. This front lip pairs well with the factory carbon fiber options from BMW or the aftermarket parts like the ADRO carbon fiber side skirts and rear diffuser. The carbon fiber front lip can be used as a standalone part or as the finishing touch to a full carbon fiber body kit.

The F80 deserves a proper send-off, and ADRO isn't leaving anything on the table. The Final Edition Side Skirts are ADRO's first and only F80 M3 skirts, built from the ground up to be the definitive version for this chassis.

The skirts extend along the full length of the rocker panel, sharpening the side profile and tying the front and rear aero together into a cohesive look.

Crafted from clear coated carbon fiber and designed to fit the F80 M3 without modification. Installs with screws onto the factory mounting points. Paired with the rest of the Final Edition kit, the full setup adds +516N (116 lbs) of downforce and just +19N (4 lbs) of drag over stock, making it a functional aero package as much as a visual one.

Side skirts are often one of the most overshadowed aftermarket car parts, but can make one of the biggest differences in the way your car looks. The ADRO BMW carbon fiber side skirts are made from 100% real, wet carbon fiber and are designed to be some of the lightest and strongest aftermarket side skirts currently available. With built-in air diffusers and a subtle yet aggressive look, these side skirts will transform the side of your car without wasting a ton of hours on installation. These skirts are easy to install and will be sturdy enough to handle a day at the track or a daily commute.

The BMW M4 F82 Fender Trim Cover is hand-crafted from premium carbon fiber and designed to accentuate the vents on your BMW. This durable fender trim cover offers an exquisite look while providing protection to the underlying fender.

The F80 M3 and F82 M4 deserve a proper send-off, and ADRO isn't leaving anything on the table. The Final Edition Rear Diffuser is the second iteration of ADRO's F8X M3/M4 rear diffuser, refined from everything ADRO learned building the original and designed to be the definitive version for both chassis.

The Final Edition replaces the factory rear diffuser entirely with a 3-piece assembly: a center diffuser flanked by two carbon fiber winglets. The center piece extends carbon fiber outward into the lower corners of the bumper, and each winglet continues along the bottom edge of the bumper toward the rear wheel. The result is a fuller, more aggressive look from behind.

Crafted from clear coated carbon fiber and designed to fit the F80 M3 and F82 M4 without modification to the factory rear bumper. Installs with 3M double sided tape, 3M Dual Lock tape, and factory bolts.

Paired with the rest of the Final Edition kit, the F80 M3 full setup adds +516N (116 lbs) of downforce and just +19N (4 lbs) of drag over stock.

The F82 M4 full setup adds +257N (58 lbs) of downforce and just +63N (14 lbs) of drag over stock. Both make it a functional aero package as much as a visual one.

The ADRO diffuser is made of 100% hand-crafted carbon fiber and will bolt up easily to your OEM BMW M3 or M4 rear bumper with no fitment gaps. This diffuser features built-in aero canards, 100% wet carbon fiber construction, and exhaust cutouts designed to fit both OEM and most aftermarket exhaust tips. This diffuser kit will completely transform the look of the back of your BMW M3 or M4 and is much easier to install than a lot of the other diffusers on the market.

The F80 deserves a proper send-off, and ADRO isn't leaving anything on the table. The Final Edition Spoiler is ADRO's first and only F80 M3 spoiler, built from the ground up to be the definitive version for this chassis.

The spoiler sits flush along the trailing edge of the trunk lid, adding a subtle but deliberate visual punctuation to the rear of the car.

Designed to fit the F80 M3 without modification to the trunk lid. Installs with 3M double sided tape. Paired with the rest of the Final Edition kit, the full setup adds +516N (116 lbs) of downforce and just +19N (4 lbs) of drag over stock, making it a functional aero package as much as a visual one.

Why Prepreg? No compromises.

Prepreg carbon fiber starts with resin pre-impregnated into the fiber at the factory, then cured under heat and pressure. The result is a precise, consistent resin-to-fiber ratio that isn't achievable with traditional wet lay methods. It's the same process used in motorsport and aerospace, and it shows in the finish, the weight, and the structural integrity of the final part.

BMW M4 is a proper sports car. A proper sports car needs a proper GT wing that creates downforce for better grip during high G-force cornering. ADRO's dry carbon fiber AT-R1 swan neck GT wing is CFD tested to improve downforce. With the AT-R1 GT wing, you can corner faster.

While some of the F82 BMW M4s have the optional rear trunk spoiler from the factory, a lot of owners find that it's not quite aggressive enough for their car; especially if they have a lot of other carbon fiber or cosmetic modifications installed. ADRO developed this hand-crafted carbon fiber spoiler for the BMW M4 that draws some inspiration from the optional OEM spoiler, but adds a whole new level of aggression. This carbon fiber BMW M4 spoiler sits higher than the factory spoiler and has angled edges to complement the sharp edged styling of the F82 M4. Plus, you may even feel a slight increase in downforce when compared to the OEM counterpart, thanks to its elevated and more aerodynamic design that allows for more air to pass under the wing to create more downforce. This carbon fiber spoiler is one of the easiest parts to install and will immediately take your M4 to the next level in performance and design.